CNC plasma cutting resources
Built for the plasma table.
Practical calculators, cut-chart guidance, troubleshooting articles, and community knowledge. No filler—just useful information for better, more repeatable plasma cuts.
Technical core
Plasma cutting calculator
Calculate starting settings
Choose a machine profile and calculate practical starting settings. Reference profiles are clearly labeled, and unsupported combinations are blocked.
Calculated side
Recommended starting settings
- Material
- —
- Thickness
- —
- Priority
- —
- Data source
- —
Important
These values are starting recommendations. Actual settings vary with the plasma source, torch, consumables, air quality, table motion, material composition, and consumable wear. Verify settings using the manufacturer’s manual and test cuts.
Your feedback
Did this calculator help?
Your answer helps improve future cut-chart profiles and calculator features.
— likes
— dislikes
From the blog
Build an evidence-based plasma-cutting library
How to choose plasma cutting settings
Understand amperage, feed rate, pierce delay, air pressure, and torch height before making your first test cut.
Read the guideWhy clean, dry air changes consumable life
A practical guide to filtration, pressure, airflow, and water contamination.
Read the guideHow to build a machine-specific cut chart
Use controlled test coupons to calibrate speed, delay, voltage, and kerf.
Read the guide
Cut quality
How to diagnose dross, bevel, and rough plasma cuts
Read the cut edge to identify speed, height, air, consumable, and motion problems.
Coming August 15, 2026About the project
Practical settings backed by documented tests.
The long-term goal is to support machine-specific profiles, consumables, cut height, pierce height, arc voltage, kerf width, and user calibration.